[HCDX] Here is my idea for testing radio sensitivity between two radios:

["Zacharias Liangas " <greekdx@xxxxxxxxx>]

Here is my idea for testing radio sensitivity between two radios:

1. Using two radios very close
2. Unfold their antennas at same length or  for  the same antenna  surface .
3. Plug two earphones into audio outs
3. tune into a  strong radio station and adjust the audio  level on both radios so that they have 
the same level . This makes audio herd in the center of the head
4. Now checking other freqs  audio varies .to one side of the earphones . That means one of 
the radios  produce stronger audio because it has better sensitivity

If one  agrees or disagrees please let me know Standard rig : ICOM R75 / 2x16 V / m@h40 
heads Sennheiser 
Please read and distribute this 15 year research article http://tinyurl.com/5vzg7e 
Please read my article on SINPO at http://tinyurl.com/yt7qjd
________________________
http://zlgr.multiply.com (radio monitoring site plus audio clips ) MAIN SITE 
http://www.delicious.com/gr_greek1/@zach (all mypages !!)
........
Zacharias Liangas , Thessaloniki Greece 
greekdx @ otenet dot gr  ---  
Pesawat penerima: ICOM R75 , Lowe HF150 , Degen 1102,1103,108,
Tecsun PL200/550, Chibo c300/c979, Yupi 7000 
Antenna: 16m hor, 2x16 m V invert, 1m australian loop 

---[Start Commercial]---------------------

Order your WRTH 2011:
http://www.hard-core-dx.com/redirect2.php?id=wrth2011
---[End Commercial]-----------------------
________________________________________
Hard-Core-DX mailing list
Hard-Core-DX@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/
_______________________________________________

THE INFORMATION IN THIS ARTICLE IS FREE. It may be copied, distributed
and/or modified under the conditions set down in the Design Science License
published by Michael Stutz at
http://www.gnu.org/licenses/dsl.html