[IRCA] Splicing files!

[Bill Harms <philcobill@xxxxxxxxxxx>]

I know this may sound crazy, but I decided to try to splice files 
together assuming they have the same center frequency and the same 
bandwidth. I recorded several files that met the above criteria and 
spliced them with GoldWave, and it worked fine, with just a couple of  
hitches. I wanted to do this because I these files were "next" to each 
other in time. I had a problem with Spectravue cutting off in the middle 
of recording (that is another issue), and I had to restart them. As long 
as the restart interval is not too much, it doesn't really matter 
significantly.
Anyway, the audio of the original recordings were still intact on the 
spliced file. You can still scan through the file as normal. However, 
the spliced file lost some of "Aux information" like the center 
frequency and the original time stamp. Also, I don't know why but the 
spliced file was a little bit wider than the original recordings 
(originals - 150 kHz and spliced - 158.727 kHz.) For the center 
frequency, if you enter the correct center frequency when you load the 
spliced file and it works just fine. I don't know how to fix the time 
stamp, so you have to live with the new one. 

So, if you ever have a reason to splice files together, it is possible.

Now back to DXing.

Bill Harms
Elkridge, Maryland

_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx