Hard-Core-DX.com: RFC - NCC-1 or NCC-2

RFC - NCC-1 or NCC-2

Sunday, July 08 2018


By all means phase two SAL's or similar if you have room. How far apart can
you place them? 73 KAZ

On Sat, Jul 7, 2018 at 6:22 PM, Brandon Jordan <dxww.irca@gmail.com> wrote:

> Hi Colin. I missed this post somehow but, since seeing it, thought I
> should respond. I own both the NCC-1 and NCC-2. I actually thought I sold
> the NCC-1 last year on eBay but obviously did not as I just found it boxed
> up in my radio room closet.
>
> I have way more experience with the NCC-1, mainly phasing dual DXE active
> whips. I bought the NCC-2 from a ham who couldnât figure out how to use it,
> but unfortunately since I put it online after a few months of being boxed,
> I donât have any output out of antenna 2 so it is going to DXE for repair.
> Long story short, no experience with the NCC-2 besides a few days of
> testing when it first arrived. The NCC-1 worked great on two DXE active
> whips spaced 100â apart.
>
> I have been so enamored with the Shared Apex Loop that regular phasers
> have been a bit on the back-burner and why I am now very interested in your
> new model. In speaking with the SAL guru Mark Bauman about dimensions on a
> SAL-35, he mentioned phasing two SALâs could be very interesting and since
> I happen to have two SAL units I am planning on experimenting with that. I
> have the post holes dug, the 35â masts aluminum masts built and etc ready
> to go but donât see me getting those up until it cools off some here in TN.
>
> 73,
> Brandon
>
> > On Jun 30, 2018, at 12:15 PM, R. Colin Newell <coffeecanuck@gmail.com>
> wrote:
> >
> > DXE NCC-2 or with its predecessor, NCC-1. PHASERS-
> >
> > Who among you have used this for DXing?
> >
> > Appreciate all comments.
> >
> >
> > Colin Newell - Victoria - B.C. CANADA -
> > DXER.ca âââ
> > _______________________________________________
> > IRCA mailing list
> > IRCA@hard-core-dx.com
> > http://montreal.kotalampi.com/mailman/listinfo/irca
> >
> > Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
> >
> > For more information: http://www.ircaonline.org
> >
> > To Post a message: irca@hard-core-dx.com
> >
> _______________________________________________
> IRCA mailing list
> IRCA@hard-core-dx.com
> http://montreal.kotalampi.com/mailman/listinfo/irca
>
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
>
> For more information: http://www.ircaonline.org
>
> To Post a message: irca@hard-core-dx.com
>
>
_
Hard-Core-DX mailing list
Hard-Core-DX@hard-core-dx.com
http://montreal.kotalampi.com/mailman/listinfo/hard-core-dx
http://www.hard-core-dx.com/

0 comments



http://www.hard-core-dx.com/article.php?story=20180708091504665