I didn’t have room for stuff indoors in a way that would’ve made sense and
not introduced more noise with longer cable runs... I try to do this in a
way anyone can but also keep noise to a minimum
On Wed, Aug 5, 2020 at 9:58 AM 'Mark Connelly' via NRC-AM <
> Great video presentation Paul.
> The info about the various commercial pieces should be valuable to many.
> For specifically MW operation you might have been able to get away with a
> 1:1 balun transformer and the common mode choke being outdoors and maybe
> everything else indoors. But maybe not.
> Thanks for providing this.
> Mark Connelly, WA1ION | South Yarmouth, MA | FN41vq
> On Tuesday, August 4, 2020 Paul B. Walker, Jr. <IRCA@groups.io> wrote:
> There’s certain things I’m comfortable with doing and certain things I’m
> a bit timid about when it comes to electronics and antennas.
> I can’t soldier or add connectors on to things that aren’t already there
> but o can build when I’ve got complete pieces
> I’ve had a few people over the years inspire me, give me ideas and push me
> in the right direction
> Since I’ve had a few questions over the years about my 25 foot long by 10
> foot tall magnetic loop antenna, I thought I’d share this video since were
> getting towards AM DX season again
> This is a detailed, 10 plus minute narrated video on how my antenna is
> built, how it’s set up and how I use it. It’s done with the paul walker
> aim of... building it with parts anyone anywhere can get and anyone, even
> as non handy and impatient as I am .... can build.
> If I can do this... anyone can.
> Groups.io Links:
> You receive all messages sent to this group.
> View/Reply Online (#10330) <https://groups.io/g/IRCA/message/10330> | Reply
> To Group
> | Reply To Sender
> | Mute This Topic <https://groups.io/mt/75991174/515133> | New Topic
> Opinions expressed in messages on this mailing list are those of the
> original contributors and do not necessarily reflect the opinion of the
> IRCA, its editors, publishing staff, or officers
> For more information: http://www.ircaonline.org
> Your Subscription <https://groups.io/g/IRCA/editsub/515133> | Contact
> Group Owner <IRCAemail@example.com> | Unsubscribe
> <https://groups.io/g/IRCA/leave/3828711/376218832/xyzzy> [
> You received this message because you are subscribed to the Google Groups
> "NRC-AM" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to firstname.lastname@example.org.
> To view this discussion on the web visit
Hard-Core-DX mailing list