Re: [IRCA] New receiver ground
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [IRCA] New receiver ground



At 05:30 PM 8/11/2007 +0000, you wrote:
>At 16:10 11/08/2007, you wrote:
>
> >On my ground rod I dug a hole 5 feet deep with a shovel and a 5 foot
> >steel bar and used a shop-vac to get the dirt out of the hole when
> >the shovel would not work any more.  I than used a large hammer to
> >pound the copper pipe in the last 5 feet but had to stop at 4 feet
> >as I hit a rock.  I than put in 30 lbs of salt with lots of water
> >over the next 2 days.  Than I used 30 lbs of Bentonite to fill the hole.
> >
Bill n' Nick:

Bentonite? What the heck is Bentonite, and what does it do?


>With those skills and dedication, Bill, we'll have to get you out to
>Grayland someday.....only problem is even when we put a good ground
>rod in, nature builds a dune on top of it before the next expedition.
>
>best wishes,
>
>Nick
>
>
>
>
>****************************************************************************
>Nick Hall-Patch
>Victoria, B.C.
>Canada
>
>****************************************************************************
>
>_______________________________________________
>IRCA mailing list
>IRCA@xxxxxxxxxxxxxxxx
>http://montreal.kotalampi.com/mailman/listinfo/irca
>
>Opinions expressed in messages on this mailing list are those of the 
>original contributors and do not necessarily reflect the opinion of the 
>IRCA, its editors, publishing staff, or officers
>
>For more information: http://www.ircaonline.org
>
>To Post a message: irca@xxxxxxxxxxxxxxxx

   Charles A Taylor, WD4INP
  Greenville, North Carolina 


_______________________________________________
IRCA mailing list
IRCA@xxxxxxxxxxxxxxxx
http://montreal.kotalampi.com/mailman/listinfo/irca

Opinions expressed in messages on this mailing list are those of the original contributors and do not necessarily reflect the opinion of the IRCA, its editors, publishing staff, or officers

For more information: http://www.ircaonline.org

To Post a message: irca@xxxxxxxxxxxxxxxx